Menu Bar Content - Choose which temperatures are displayed along with optional fan speeds. Stacking Order - Decide which way the information will be stacked. Horizontal will use more space and have a larger font, whereas vertical will use less space and have a smaller font. Here's an example of what each one looks like: Horizontal: Vertical: Options - A few choices to customize how the information will be displayed.
Note: The "Use smaller font" is not available for the Vertical stacking order since it already uses a fairly small font. Another few settings that are worth checking out before continuing are in the Temperature preference tab. Optional - Enable this to also check the drive temperatures through S. On some older Macs this can slow things down which is why there is a warning about this. Reset Max Temperatures - Reset all the maximum temperatures that have been recorded.
These are shown in the main window when hovering the mouse over a particular temperature as well as a vertical black bar at the end of each row. Monitor all internal temperatures. One of the most common thing people like to do with TG Pro is to check and monitor all the internal temperatures.
Sometimes it's just for curiosity, and sometimes it's because there might be an issue and this will help to track it down. The best place to start is the main window to look at all the different temperatures sensors, and which types are available. On the left 1 is a list of hardware areas along with a row at the top labelled "All". Choosing this as in the screenshot above will show every temperature sensor that TG Pro can detect. If you'd like to only see sensors for a particular area ex: CPU , just click once on that row. On the right 2 , are all the temperature sensors for the chosen area.
To see the maximum recorded temperature for a particular sensor, simply hover the mouse over that row and a popover will appear. The same information is displayed as the vertical line at the end of each temperature level. What do green, yellow and red mean for temperatures? The temperature bars will be one of three colours: Green - The temperature is between 0 to 89C 32 to F and is generally nothing to worry about.
Orange - The temperature is between 90 to 99C to F and is getting closer to the thermal limit of the hardware. Red - The temperature is at or above C F and it very close to the thermal limit.
It's a good rule to not let components run this hot for an extended period of time. It's usually a CPU sensor that will display a temperature this high. If you find components are continuously showing orange or red, and the fans are not running at full speed, please see the section on using fan control to cool down the Mac. Different types of sensors. Each Mac has a unique set of temperature sensors that TG Pro can access. However, some are common across all models, such as CPU, Memory, etc. Here are the different types that might be available along with an explanation of what they are.
These are the ones that usually get quite hot since it's the CPU that does most of the work to make the computer function. These are special sensors that manage the ProcHot temperature. ProcHot is interesting because it's actually the reverse of a normal temperature. It starts at a negative number and increases as the temperature goes up. When it reaches 0, the CPU will begin to throttle to cool it down. Enclosure - Available on some desktop Mac models where there are temperature sensors inside the case although not on any particular component.
This also includes the HD drive bays for the older model Mac Pros. HD - Temperatures from the hard drives from either S.
Mac hdd fan control serial
Memory - Temperatures from the memory slots, banks or in some models memory that has been soldered to the motherboard. Logic Board - Temperatures from the logic board which contains controllers that connect the disparate components of the computer together. For more information, please see here. Thunderbolt - Temperatures from around the Thunderbolt port s.
The best 'Fan Control' software?
Wireless - Temperatures from around the Airport wireless chip. Monitor fan speeds. Going back to the main window, let's look at the Fans area, as indicated by 1. Each fan that's inside the Mac will be shown in this area. In this example a Late 13" MacBook Pro , there is only one fan. So if the fan is spinning at RPM that means it does a full spin times per minute.
The higher the RPM the faster the fan is spinning which equates to more cooling. If you're interested in learning more about how the fans work, check out the Wikipedia article on Computer fans.
- iMac HDD Fan Control Alternatives.
- analizador de frecuencias para mac.
- loud mac miller download clean.
- oracle java 7 jre mac download!
It also shows the current speed, which is RPM. The fan speed will never go below this, although you may see a slight variation occasionally where it's a few RPM lower. The fan speed will never go above this, although the same caveat as in 3 applies.
- expense report template free for mac.
- formula 1 manager game mac.
- Subscribe to RSS.
- autocad civil 3d mac osx.
- Control Your Mac's Fan Speed Manually or Use a Temperature Profile.
This is detailed in the Using fan control to cool down the Mac section. When this happens, TG Pro cannot control it until the hardware turns it back on. This is what it will look like:. What do green, yellow and red mean for fan speeds? This is generally nothing to worry about since the system will move the fan speeds up and down as necessary, although usually quite conservatively.
This is one reason why TG Pro has the fan control feature. This is also usually ok if it's for a short time when the Mac is working hard, except if it's always in this range or red. This means the fan is pretty much maxed out. Again, this is ok if the Mac is working hard, except if it's continuously running red. If a fan is always running red, even under a light load, it's possible that the fan is defective or it's clogged with dust.
To check for a defective fan, see the Check for defective hardware section. For cleaning a fan, using compressed air around the air vents can help to clear out any dust and debris. If you're really adventurous, open up the Mac and use the compressed air inside to give it a really thorough cleaning. For information, search on Google for "cleaning inside Mac" or see an example under the "Get Rid of Dust" section of this Macworld article. Check for defective hardware. Again, going back to the main window, we'll be looking at the Diagnostics area, as indicated by 1.
There are three parts to this: Last Shutdown: - This indicates if the last time the Mac was shutdown was normal, abnormal or forced. Some examples of a forced shutdown would be if the battery died or the Mac overheated to the point of turning off. This this case it is "Normal" since the user used the "Shutdown Fans: - This shows if any of the fans are labeled "bad" by the hardware.
There is a special sensor that TG Pro checks to see if any of the fans are potentially defective. If one or more of them are, the name of them will be shown as indicated by 2.
Amazing macOS and tvOS apps
In this case, the "Right Side" was reported to be defective. It means TG Pro has detected that one or more fans could be defective in some way. A fan labelled as defective might be working properly now although it's possible it might be about to fail. This can be from a variety of reasons, the most common are: A Is that it's clogged with dust. To clean a fan, spray the exhaust grill with compressed air and then gently vacuum the dust that gets expelled. B It's a one off event and restarting the Mac may set the diagnostics back to normal. C The system has detected that the fan speed is abnormally going up and down.
Temperature Sensors: - If any of the temperature sensors are labeled "bad" by the hardware, they will be shown here. Just like for the fans, TG Pro checks a special sensor for this information. Battery Health: - This shows the condition of the battery if the Mac has one , any errors that have been reported along with the charge cycle count as indicated by 4.
The condition will be one of the following: Good - A well-performing power source. Fair - A functional power source with limited capacity. Poor - A power source that's not capable of providing power. If the condition is Fair or Poor, there will usually some error messages provided by the system shown in brackets.
The charge cycle count is the number of times the battery has been discharged and charged. For example, if it shows 10, then the battery has been discharged by some amount and recharged by plugging the Mac in to a power outlet. Most Mac laptops have batteries that are designed to handle up to charge cycles without any issues. Using fan control to cool down the Mac.4840.ru/components/handy-ueberwachung/fomap-spionage-app.php
The best 'Fan Control' software? | MacRumors Forums
One of the best features of TG Pro is the full fan control. It's a special weapon against hot Macs and fans that have gone crazy. Using the fan control is a great way to quickly cool down a hot Mac. Keeping the temperatures down and especially the CPU cool will help to prolong the life of your Mac. There are three modes for fan control: System , Manual and Auto Boost. To switch between these modes, open the main window, or click the status menu.
You will see control like these:.
Related mac hdd fan control software
Copyright 2019 - All Right Reserved